EOBPr CMOS Camera Development, Test and Simulation System
CUSTOM
GET QUOTE
For a quote on your custom requirements please send us your drawing or specification.
The EOBPr Engineering & Simulation Development Unit is a ground-based platform designed for camera integration, simulation and laboratory testing. It receives image data from the camera system and outputs either RAW video or H.264 compressed streams through configurable interfaces. The modular architecture enables flexible system integration, performance evaluation and validation during development and engineering model activities.
Typical Applications:
- Satellite avionics simulation and integration
- Camera-to-OBC interface verification
- Algorithm development and validation
- End-to-end data flow testing in laboratory environments
| Parameter | Specification |
|---|---|
| Sensor | Global Shutter Visible CMOS image sensor (Monochrome / Bayer RGB option) |
| Resolution | 4 MP (2048 × 2048 px) |
| Frame Rate | Up to 180 FPS |
| FOV | 40° (H) x 40° (V) |
| Dark Current (25°C) | <120 e-/s |
| Read Noise | <12 e- |
| Electronic Architecture | Flash SoC Onboard H.264 video compression 2 GB DDR4 (PL) + 1 GB + ECC DDR4 (PS) 16 GB eMMC |
| Interface | 1 x Micro USB 2.0 1 x USB 3.2 Gen 1 Host/Device (5 Gbps) (Video/Image Out) 2 x Ethernet (10/100/1000 Mbit) (Video/Image Out) 1 x HDMI / MiniDisplay (Video/Image Out) 1 x SFP+ (Video/Image Out) UART / SPI / CAN Control (configurable) 1 x microSD Card Slot / 1 x Battery Slot |
| Power Supply / Consumption | 12V / 9.5 W (average) |
| Operating Temperature Range | -30 °C to +60 °C |
| Dimensions | 135 x 138 x 39 mm³ (excluding optic) 135 x 138 x 89 mm³ (including optic) |
| Mass | 830 g |
